How Much Does It Cost To Install Security Cameras 2022?

Installing security cameras can be a great way to deter crime and keep your home or business safe. But how much does it cost to install security cameras? The answer depends on a few factors, including the type of camera, the number of cams, and the installation location. Let’s be with Lacoon to get more valuable information about camera installation cost.

How Much Does It Cost To Install Security Cameras?

How Much Does It Cost To Install Security Cameras

Installing a 4-camera home security system is likely to cost $500 to $1600. For setup and labor, an 8-camera system will cost $1,000 to $2,500. Professional labor costs range from $80 to $200 for each camera that you buy to set up and install.

Installation Cost of Wired Security Cameras

Installation of wired security cameras costs $150-$500 per camera, depending on the type and labor rate. A 4-camera wired security system will cost $600 to $2,000 to set up. Hardwired systems are more costly to install and require drilling holes for the cables to run.

Installation Cost of Wireless Security Cameras

Wireless security cams can be installed anywhere from $130 to $400, depending on their brand and labor. A complete setup of a 4-camera wireless security camera system will cost between $500 and $1500.

Wireless systems allow remote access and are easy for DIY or to move. Wireless security footage can be transmitted over Wi-Fi, but wired power is still required. They can be damaged by signal interference and hackers, so that an electrical outlet may be required.

Cost of Security Camera Installation Labor

The average cost of security camera installation labor is between $80 and $200, depending on whether the camera is wired or wireless and whether it’s an IP or CCTV camera. For labor costs alone, security camera setup costs for a four-camera CCTV system are $400 to $800. The price drops if you have more cameras.

Security Camera Installation & Setup

Professional installation can cost more than the price of the camera. The following are the labor rates that a contractor will consider when installing a camera:

  • Run cables through walls
  • Eliminating interference from signals
  • Assure clear visibility of desired coverage area
  • To deter criminals, cams should be installed in visible locations.
  • Secure cameras and infrastructure
  • Configuration of motion privacy and notification zones, notifications, and video quality

Cost of Security Cameras Based On the Type

Security cameras cost $50-200 each, with labor costs of $100-200 per camera. Prices for security cameras vary depending on whether they are wired or wireless, indoors or outdoors, their resolution, type and the features.

Prices for Security Cameras by Type

While standalone Wi-Fi cameras are cheaper, high-resolution 4K cameras and systems with a broader field of view or higher resolution cams can be expensive. There are five main types of security cams: doorbell, concealed, bullet, box, PTZ and dome.

Fake Camera$10 – $20It looks like a camera, and serves as a deterrent.
Bullet Camera$50 – $250Traditional exterior camera
Doorbell Camera$100 – $250Allow you talk and see visitors
PTZ Camera$100 – $300Pan, tilt, and zoom cameras that can be operated remotely
Analog CCTV Camera$25 – $300Connects to a DVR, allowing you to record or watch on a TV or monitor.
Hidden / Mini Camera$20 – $350Sometimes it's a peephole, a clock, or a picture frame.
Dome Camera$80 – $350Movement control, ceiling mounted, broad field of view
Smart Home Camera$30 – $400Use Amazon Alexa, Google Assistant, and Apple HomeKit to get things done.
Box / C-Mount Camera$100 – $500Camera with interchangeable lenses for commercial use
Underwater Camera$170 – $600Swimming pool cameras that are submersible
License Plate Recognition (LPR)$140 – $900Captures the details of a stationary or moving license plate.
Thermal (FLIR) Camera$1,400 – $3,000It is possible to see through smoke, fog, rain, and full darkness.

CCTV Camera Installation Costs

cctv installation cost

For complete setup and labor costs, the average price for installing a CCTV camera in a home is between $150 and $450. An entire 4-camera CCTV system will cost between $600 and $1,600. The CCTV system is simple to set up and can be recorded 24/7.

CCTV systems can be used without the internet by connecting to a DVR or monitor to record or monitor. Most analog CCTV cameras can only record 1080p at most and are not accessible remotely. Digital NVR CCTV can record up to 4K, but wired systems are more expensive to install.

CCTV Fitting Cost

For the labor alone, CCTV installation costs $100-200 per camera. A one-time CCTV license is required for CCTV cameras that use a NAS or PC to store video. It costs $30 to $60 per camera.

IP Camera Installation Charges

Internet Protocol (or IP camera) installation costs between $125 and $400 per camera, depending on the materials and labor costs. Wireless IP cameras can be set up DIY and offer 4K resolution recording. They are vulnerable to hacking and require internet access.

PTZ Security Camera Price

PTZ (pan tilt zoom) security cameras, also known as pan tilt zoom, cost between $100 and $400. They can be used indoors or outdoors. PTZ cams can be either analog or IP. They can pan, tilt and zoom in all directions. PTZ cameras are able to monitor preset locations and automatically track movement.

Mini Home Security Cameras

Mini cameras are available in a range of prices, from $20 to $350. They can be easily installed, disguised as USB chargers or DVD players, smoke detectors or clocks, and even disguised as clocks or picture frames. They can record 24/7 to cloud storage or motion-triggered events onto a memory card.

Surveillance Camera Installation Cost Factors

Surveillance Camera Installation Cost Factors

Cost factors for surveillance cameras include outdoor placement, resolution and field of view. Night vision, motion detection, monitored services, remote monitoring, connectivity, video storage, number of cams, and other features.

Home size: Larger houses require more cameras with a better resolution to cover every door and window.

Security Requirements: A doorbell camera works well for front doors. However, you will need multiple indoor and outdoor cameras to provide complete coverage.

Wired or Wireless: Wireless installation is more expensive than wired because there are running cables.

External or Internal: Exterior cameras must be weatherproof and waterproof. They are typically more expensive than interior cameras.

Monitored or unmonitored: Security companies can monitor your cameras 24/7 and offer other upgrades for an additional monthly fee.

Local Storage or Remote Storage: Security cams can use local storage or fee-based plans for remote cloud storage.

Check out our gudie How to install security cameras if you want to save your installation budget.

Indoor vs. Outdoor Security Cameras

An outdoor system will cost you $20-$55 more than an indoor one. The exterior cameras can be installed outdoors and are weatherproof. They also have night vision, floodlights, sirens, and zoom features. Indoor cameras are smaller and can be easily set up and moved. They have the same characteristics.

Add Security Cameras to a House

Installation labor costs for adding security cameras to a home can run $100-$200 depending on whether they are wired or wireless. A new camera costs $100 to $350 for more cams than your DVR/NVR can support, and hard drive storage costs $50 to $100.

Camera Resolution

The resolution of a security camera is the file size. High-resolution cameras can produce HD video with greater detail. The price of each camera will vary depending on the resolution.

Low vs High Camera Resolutions

 Low ResolutionHigh Resolution
Cost$45 – $250 each$60 – $350 each
ResolutionBelow 1080P, HD, or 1920 x 1080At or above 1080P. From 2048 x 1536 and up, 4K
FeaturesThere will be less details. When images are magnified, they pixelate. Mostly used for general reasons.When zoomed in, photos of people, animals, and license plates become more distinct. Face recognition is enabled. More bandwidth is required, and larger video files are stored.

FPS or Frame rate

The FPS or frame rate is the number of images that the camera takes every second. Higher frame rates require more storage space and are more expensive. While 4K cameras can capture 30 frames per second for the best videos, many cameras can only capture 22 to 25 frames per second.

While 4K cameras can capture 1080P (HD) video at 30 FPS, some 4K cams will drop the frame rate to 22-25 fps or lower when recording in 4K. The 2K and 3K cameras are usually cheaper, with 15 to 22 frames per second. Some can even reduce it to 1 FPS to save memory.

Field of View

The camera’s field of view is measured in degrees. This estimates how wide the lens can see. Most security cameras can capture images between 87deg to 130deg, depending on whether they are wide-angle or narrow. The 360deg cams are the most expensive, as they capture everything in one frame. PTZ cameras can rotate to cover the same area.

Traditional camera images are rectangular. 360deg cameras create a circular or fishbowl effect. A 90deg field is required for interior bullet cameras when mounted in the corner or the middle of a space. The best place to mount a 360deg camera is the ceiling in the center of the room is the best.

Motion Detection

Security cameras with integrated motion detection can cost between $40 and $150, while essential motion detectors are $20 to $50. Motion detectors can detect heat and look for changes in pixels. They can be used to trigger alarms and lights or record when motion is detected. This will reduce data storage and power consumption.

You can designate specific regions of interest (ROI), which allow you to exclude areas such as busy streets and neighbor’s properties so that you only receive the relevant alerts.

Night Vision & Infrared Illuminator

Exterior cameras with infrared night vision (IR) cost from $20 to $200. Others that can reach 300 feet are priced between $200 and $400. An additional IR illuminator/bulb is available for $20-60 each to extend that reach. The effectiveness of an infrared camera for night vision depends on how many LEDs are used, their strength and what camera sensor is used.

Color night vision cameras are available at prices from $80 to $380. They require light to operate and can show the vehicle and clothing colors. The camera will use black-and-white IR night vision if there isn’t enough light.

Remote Monitoring Service Pricing

Remote monitoring costs $20 to $80 per month with $100-$250 upfront fees for setup, wireless CCTV equipment and activation. Monitoring systems offer 24-hour protection and alert law enforcement to intruders, disturbances, fires, etc.

Another security camera can be remotely monitored via an app. This allows you to view live video or playback recordings from earlier movements.

Video Storage

Cameras can either capture short, motion-triggered clips to a card or upload the footage to cloud storage. The files stored in an NVR or DVR are usually used to record video 24/7.

  • Local Storage – Micro SD memory card or NVR/DVR
  • Cloud Storage – A monthly subscription service

Local Storage

Security-rated SD memory card cards are $15 to $35 and can hold up to 6 days of 24/7 coverage or up to one year of triggered events. A DVR can store hard drives from $100 to $300, and an NVR can hold $150 to $500, depending on how many cameras it supports.

These are the key differences between a Network Video Recorder and a Digital Video Recorder.

Cloud Storage

Cloud storage for security cameras costs between $3-$30 per month and $30-$300 per year, depending on how many cameras are used, the storage days, and whether there are 24/7 or triggered recordings.

Wyze, Arlo and Netgear offer security cameras with cloud storage for free. An alternative option is to use an online service such as Dropbox for $5-$20 per month.

Facial Recognition

On average, security cameras with facial recognition can cost between $120 and $350. Brands include Simcam, Tend and Amaryllo. Facial recognition software sends you alerts when your children get home or if there is someone unfamiliar at your house.

Power Source

An electrician must install an outlet for wired cameras using an AC adapter. The cost to hire an electrician to do this will be $120 to $150. You can also use solar panels ($25 per), batteries, or Siamese cables to power your equipment. Rechargeable batteries last for between four and six months.

Connectivity & Wiring

Wired CCTV cameras connect via coax to a DVR, while IP ones connect via ethernet Cat 5 to an NVR. For 100′ of coax, cat 5/6 cables or $200-$500 for four cams, that is about $120 each camera; it costs $200-$500. Cables are less expensive to install in single-story homes with access to the attic.

Additional Camera Features

Sunshades: Cameras with sunshades are $200-$500. They are used when the camera captures the rising or setting sun. This reduces image quality.

Siren: Security sirens are typically priced between $90 and $250. They help scare away unwanted guests.

Floodlight: Floodlight cameras are $50 to $150 and can be used to deter burglars. Floodlight cameras can capture in-color images for a clearer picture.

E911: E911 connects you to law enforcement dispatchers closest to the camera location in case of a triggered incident. E911 comes with monthly plans that cost $10-20.

Camera Microphone Wiring: Cameras with microphone wiring begin at $20. Most cameras only record sound, but some include speakers for 2-way audio.

Check out our Top Best Wireless Security Cameras


The cost of installing security cameras can vary depending on the type of system you choose and the number of cameras you need, etc. Hope that this post can help you know clearly about installation costs.

Leave a Comment

Your email address will not be published.